Pentair Everpure

The H104 is third party tested and certified by the National Sanitation Foundation (NSF). This means that the claims that Everpure makes regarding performance and capacity have been tested and certified to be true.  This provides you with peace of mind that what you...

Full Flow means 2.2 gallons per minute flow rate! That's more than four times the flow rate and more than double the capacity of our traditional drinking water systems.  The PBS400 is the replacement water filter for the PBS400system.  This cartridge can also be...

The Quantum 1000 cartridge is the replacement for the Q1000 water filter system.  We also have a higher capacity Quantum Q4000 if you require greater capacity and have the additional space. The Q1000 and Q4000 are third party tested and certified by the National Sanitation...

The 2FCS water filter is Fibredyne-II 1/2 micron carbon block media that inhibits the growth of bacteria on the filter media, which can cause short life.  In addition, the integrated beaded polyphosphate scale inhibitor helps prevent limescale build up. The 2FCS water filter is...

The EF-3000 is third party tested and certified by NSF (National Sanitation Foundation). The two important standards are #42 and #53: NSF/ANSI Standard #42 is for chlorine & particulate reduction.  NSF/ANSI Standard #53 is for cyst and lead reduction.   We recommend changing this water filter annually or when...

The H54 is third party tested and certified by the National Sanitation Foundation (NSF). This means that the claims that Everpure makes regarding performance and capacity have been tested and certified to be true.  This provides you with peace of mind that what you...

H300 Features: Reduction of Lead, which is reduced to below the Federal Action Level of 15 parts per billion Reduction of Volatile Organic Compounds (VOCs), including THMs Reduction of chlorine off tastes and odors, dirt and cloudiness, mold and algae Bacteriostatic control Oxidized iron, manganese and sulfides reduction...

The EF-6000 is third party tested and certified by NSF (National Sanitation Foundation). The two important standards are #42 and #53: NSF/ANSI Standard #42 is for chlorine & particulate reduction.  NSF/ANSI Standard #53 is for cyst and lead reduction.   We recommend changing this water filter annually or when you...

The EF-1500 is third party tested and certified by NSF (National Sanitation Foundation). The two important standards are #42 and #53: NSF/ANSI Standard #42 is for chlorine & particulate reduction.  NSF/ANSI Standard #53 is for cyst and lead reduction.   We recommend changing this water filter annually or when...

The H1200 water filter system is unique in that it is a 2-stage system to ensure maximum reduction of substances.  Both water filters must be changed at the same time and are sold together as a kit.   The H1200 is third party tested and...

The 7CB5 water filter is 5 micron carbon block and is well suited for problem water areas where you are experiencing short life with your existing Everpure fine filter(s).  The 7CB5 is also used in non-drinking water applications such as steam cooking. The 7CB5...

Claris is unique because of the multi-stage filtration process: prefiltration carbonate hardness adjustment fine filtration chlorine removal Please refer to the Claris Ultra Brochure for a detailed breakdown of your choices. You can install the systems on the wall but we suggest sitting them...

The AC replacement water filter was initially found in the QC2-AC and QL2-AC drinking water systems, designed for RV's and boats. Today the AC water filter is used in a wide variety of drinking water applications. The AC filter is third party tested and...

The Quantum 1000 and 4000 water filters provides absolute ½ micron (1/50,000 inch) filtration, removing 99.9% of all particles like dirt, lead, asbestos fibres, harmful cysts such as Giardia lamblia and Cryptosporidium. They also remove chlorine, and other offensive tastes and odors. The Q4000...

*Please call us before placing an order to check the availability of products to avoid unwanted delays/cancellations. The Pentair Everpure CTO-Q10CR replacement cartridge is engineered for commercial kitchens, coffee stations, steam ovens, and beverage systems that demand cleaner water, lower maintenance, and longer equipment...

Overall Dimensions:20”H x 2.63” Diameter Service Flow Rate:Maximum 2.0 gpm (7.6 Lpm) Pressure Requirements:30 - 125 psi (2.1 - 8.6 bar), non-shock Temperature:40 - 100°F (4.4 - 38°C) Same as Optipure SCLX2-2 Cartridge #252-60210 For more details : Click Here

The CTO-20 is a 20” Drop-In cartridge that reduces sediment down to 0.5-microns and reduces chlorine, taste & odor at a flow rate of 3.0 gpm for 30,000 gallons. This is the replacement cartridge used in the following filter housings: FX-12 #160-50020 FX-22 #160-50025 FX-22P #160-50030...

Everpure manifolds provide dealers and professional installers with the ability to build the system you need, when you need it using the right cartridges for the job.  This keeps your inventory to a minimum and provides great flexibility and customization. Example #1: You can...

The low profile head is ideal for locations where space is at a premium. This head is best used with Everpure 2-size and 4-size water filters. Examples of a 2-size water filter: OCS 2CB5 2K Plus Examples of a 4-size water filter: 4C/4H 4K...

The 4CB5 water filter is five micron carbon block and can be used in place of any 4-size Everpure cartridge. i.e. 4C, 4K Plus, etc.   We have three models of 4CB5 water filters for you to choose from: 4CB5 4CB5S 4CB5K The difference between...